HTC vacuum Z type inline valve is one type of the poppet valves. When the poppet is moved toward the top of the valve, the internal body cavity is open to the system, and flow is unimpeded (maximum conductance). Once the actuator moves the poppet to the bottom of the valve, an elastomer sealing ring is compressed onto the sealing surface of the lower body of the valve. This action creates a vacuum tight seal and stops the flow. HTC vacuum offers a wide variety of valve types in a comprehensive range of sizes. They are manually and pneumatically, with bellows and without bellows. Port terminations are available in KF, ISO, CF, and Tube End. HTC vacuum designs all series angle valves suited for vacuum applications with venting processes, high vacuum applications in pumping systems, semiconductor technology, research systems, etc.
Body: 304 S.S. (Other material available upon request)
Poppet: 304 S.S. (Other material available upon request)
Port ODs: 3/4 ~ 8 inch (19.05 ~ 203.2 mm)
Bellows: Welded AM-350 (option)
Position indicator: Option
Seal: Viton O’ring
Leak rate: 2×10-9 mbar-l/sec
Pressure range: 1×10-9mbar to 1000 mbar Viton seal bonnet
Maximum △pressure before opening: 1.2 Bar
Operating air pressure: 4 ~ 6.5 kg/cm2
Cycles until service: 3/4 to 2 inch (19.05 to 50.8mm) — 500,000 times
(full orifice open） 2.5 to 6 inch (63.5 to 152.4mm) — 250,000 times
8 inch to larger (203.2mm to larger) — application dependent
Bakeable to 150 C°
Larger or special size available upon request, contact us with your specific requirements.
AVT Services is proud to represent Highlight Tech Corp (HTC Vacuum).